Product Description
Oil lubricating 2 stage compression double rotors rotary screw air compressor
Two stage compression features and advantages:
1.The intaked air flow after compressed by the first stage compression, connect with large amount oil mist in the cooling channel then cool fast, and then goes into the second stage compression system to be compressed and discharged under the requirement pressure, much more energy saving than 1 stage compression type.
2. Adopt German double rotor screw air end, big rotor and low rotary speed designing, the first and the second stage compression rotors are designed in 1 compression chamber, through different driving gear and driven gear ratio to get the best seal speed of the first stage and the second stage rotors gear top line, greatly improving the air end compression efficiency.
3. Adopt internal spray oil cooling type, enable air isothermal compression, saving energy by 8%.
3. Each stage compression ratio is as low as 3:1, little internal leakage, improving efficiency by15%.
Smaller compression ratio can improve running stability and reliability, high efficiency working, long using life, very low fault rate.
4. The whole unit machine can reach China national level-1 energy efficiency standard.
5. Have fixed speed type (TKL) and permanent magnetic frequency conversion motor one-piece shaft type (TKLYC).
I. TKL series of 2 stage compression twin screw air compressor
Adopt advanced twin rotor screw air end imported from German and Italy, rate of 5:6, high precision of gear and seal, use CZPT bearing and high grade oil seals to ensure the main engine long life and low noise operation. The air end and the diesel / electric motor is directly connected through the high elastic coupling, no gear, less energy consumption, more air output, high reliability, long service life and low maintenance cost.
II. TKLYC series of Permanent magnetic frequency conversion 2 stage compression twin screw air compressor
Adopt energy saving permanent magnetic frequency conversion screw air end:
1. Adopt One-piece shaft connection structure for the permanent magnetic motor and the air end
★Permanent magnetic Motor’s rotor is directly sleeved on shaft of the air end, embedded integrated direct-connecting structure, without coupling part or transmission gear part, namely one-piece shaft, ensuring of 100% transmission efficiency.
★Taper connection is adopted for motor, and it can be assembled and disassembled very simply.
2. Adopt permanent magnetic frequency conversion electric motor
★Permanent magnetic frequency conversion motor is the most advanced technical electric motor, efficiency can be up to 97%, higher by 3%-5% than ordinary motor with frequency conversion device type, saving energy a lot obviously.
★Permanent magnetic electric motor adopts high temperature resistance rare earth permanent magnet to ensure no demagnetization. Without motor bearing or sleeve, so no need lubricating grease, no need concern alignment problem, compact structure, saving space, convenient use and maintenance.
3. Wide frequency conversion, constant pressure air feeding
★Frequency application scope (0HZ-200HZ) is wide, and motor efficiency under different load is basically constant.
★The motor is big torque, strong adaptability and loaded startup.
★The whole machine work under frequency conversion state, and can operate frequency modulation according to the client’s actual requirement of air consumption at constant pressure, realizing high efficiency and energy saving.
4. Running stable and reliable
★Machine starting up under frequency conversion state, greatly reducing the impacting to the power grid equipment, avoiding of damage to the electric equipment and saving electric energy when starting.
★No need to set working pressure up and bottom limit value, can operate by regulating the frequency at the setting pressure point to stabilize the pressure, so can save electric energy by 10%-15%.
5. Energy saving a lot obviously
Compared with the fixed speed type compressor, our permanent magnetic frequency conversion compressor can save energy by 30%; compared with the ordinary motor with frequency device type compressor, our compressor can save energy by 5%-10%.
Technical parameter of 2 stage air compressor (TKLYC type):
| Type | Exhause pressure (Mpa) | Air displacemen (m3/min) | Power (Kw) | Noise (dBa) | Dimensions (mm) | Outlet pipe size | Weight (Kg) |
| TKLYC-15F-II | 0.8/1.0/1.3 | 2.7/2.3/2.2 | 15 | 66 | 1600*900*1300 | G1 1/2 | 800 |
| TKLYC-18F-II | 0.8/1.0/1.3 | 3.5/3.0/2.5 | 18.5 | 66 | 1600*900*1300 | G1 1/2 | 840 |
| TKLYC-22F-II | 0.8/1.0/1.3 | 4.0/3.5/3.0 | 22 | 66 | 1600*900*1300 | G1 1/2 | 860 |
| TKLYC-30F-II | 0.8/1.0/1.3 | 6.4/5.0/4.2 | 30 | 68 | 1800*1500*1510 | G1 1/2 | 1100 |
| TKLYC-37F-II | 0.8/1.0/1.3 | 7.0/6.0/5.5 | 37 | 68 | 1800*1500*1510 | G1 1/2 | 1100 |
| TKLYC-45F-II | 0.8/1.0/1.3 | 9.5/8.8/8.1 | 45 | 68 | 1800*1500*1510 | DN50 | 2200 |
| TKLYC-55F-II | 0.8/1.0/1.3 | 11.5/10.9/10.5 | 55 | 68 | 2300*1400*1800 | DN50 | 2600 |
| TKLYC-75F-II | 0.8/1.0/1.3 | 16.1/14.5/12.5 | 75 | 68 | 2300*1400*1800 | DN65 | 2850 |
| TKLYC-90F-II | 0.8/1.0/1.3 | 19.8/16.5/13.5 | 90 | 68 | 2470*1700*2571 | DN65 | 2950 |
| TKLYC-110F-II | 0.8/1.0/1.3 | 24.0/19.8/17.2 | 110 | 68 | 3100*1740*2150 | DN80 | 3000 |
| TKLYC-132F-II | 0.8/1.0/1.3 | 28.3/23.2/19.2 | 132 | 70 | 3100*1740*2150 | DN80 | 3100 |
| TKLYC-160F-II | 0.8/1.0/1.3 | 33.3/28.4/23.6 | 160 | 72 | 3460*2040*2200 | DN80 | 5400 |
| TKLYC-185F-II | 0.8/1.0/1.3 | 38.5/33.3/28.4 | 185 | 72 | 3460*2040*2200 | DN80 | 5600 |
| TKLYC-200F-II | 0.8/1.0/1.3 | 41.3/38.5/33.5 | 200 | 75 | 3460*2040*2200 | DN80 | 5800 |
| TKLYC-220F-II | 0.8/1.0/1.3 | 45.5/40.8/37.6 | 220 | 75 | 3720*2220*2200 | DN100 | 6100 |
| TKLYC-250F-II | 0.8/1.0/1.3 | 54.7/44.9/40.3 | 250 | 75 | 3720*2220*2200 | DN100 | 6200 |
Technical parameter of 2 stage air compressor (TKL type):
| Model | Exhause pressure (Mpa) | Air displacement (m3/min) | Power (Kw) | Noise (dBa) | Dimensions (mm) | Outlet pipe size | Weight (Kg) |
| TKL-45F-II | 0.8 | 9.5 | 45 | 68 | 1800*1500*1510 | DN50 | 2400 |
| 1.0 | 8.8 | ||||||
| 1.3 | 8.1 | ||||||
| TKL-55F-II | 0.8 | 11.5 | 55 | 68 | 1800*1500*1510 | DN50 | 2430 |
| 1.0 | 10.9 | ||||||
| 1.3 | 10.5 | ||||||
| TKL-75F-II | 0.8 | 16.1 | 75 | 68 | 2470*1700*2571 | DN65 | 2700 |
| 1.0 | 14.5 | ||||||
| 1.3 | 12.5 | ||||||
| TKL-90F-II | 0.8 | 19.8 | 90 | 68 | 2470*1700*2571 | DN65 | 2800 |
| 1.0 | 16.5 | ||||||
| 1.3 | 13.5 | ||||||
| TKL-110F-II | 0.8 | 24.0 | 110 | 68 | 2660*1700*2571 | DN65 | 2850 |
| 1.0 | 19.8 | ||||||
| 1.3 | 17.2 | ||||||
| TKL-132F-II | 0.8 | 28.3 | 132 | 70 | 2660*1700*2571 | DN65 | 4150 |
| 1.0 | 23.2 | ||||||
| 1.3 | 19.2 | ||||||
| TKL-160F-II | 0.8 | 33.3 | 160 | 72 | 3460*2040*2200 | DN80 | 5100 |
| 1.0 | 28.4 | ||||||
| 1.3 | 23.6 | ||||||
| TKL-185F-II | 0.8 | 38.5 | 185 | 72 | 3460*2040*2200 | DN80 | 5200 |
| 1.0 | 33.3 | ||||||
| 1.3 | 28.4 | ||||||
| TKL-200F-II | 0.8 | 41.3 | 200 | 75 | 3460*2040*2200 | DN80 | 5250 |
| 1.0 | 38.5 | ||||||
| 1.3 | 33.5 | ||||||
| TKL-220F-II | 0.8 | 45.5 | 220 | 75 | 3720*2220*2200 | DN100 | 6100 |
| 1.0 | 40.8 | ||||||
| 1.3 | 37.6 | ||||||
| TKL-250F-II | 0.8 | 54.7 | 250 | 75 | 3720*2220*2200 | DN100 | 6200 |
| 1.0 | 44.9 | ||||||
| 1.3 | 40.3 |
Our factory and workshop
After sales service:
1. Providing professional air compression program designing for free.
2. Providing our factory original machine parts at lowest price after machine sales.
3. Providing training and guidance for free, customers can send their staff to our factory to learn how to operate the machines.
4. Warranty period: the screw main machine is 1 year, the bearing is 1 year, the wear parts of air intake valve, electric components, electromagnetic valve, rate valve are 6 months
5. The air filter, oil filter, oil-water separator, lubricating oil, rubber parts and etc. are not included in warranty range.
Certification and patents of our air compressor
FAQ:
Q1: Are you factory or trade company?
A1: We are factory.
Q2: Warranty terms of your machine?
A2: One year warranty for the machine and technical support according to your needs.
Q3: Will you provide some spare parts of the machines?
A3: Yes, of course.
Q4: How long will you take to arrange production?
A4: 380V 50HZ we can delivery the goods within 20 days. Other electricity or other color we will delivery within 30 days.
Q5: Can you accept OEM orders?
A5: Yes, with professional design team, OEM orders are highly welcome!
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Cylinder Position: | Vertical |
| Structure Type: | Closed Type |
| Installation Type: | Stationary Type |
| Type: | Twin-Screw Compressor |
| Customization: |
Available
|
|
|---|
Choose an Air Compressor for Your Business
There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
Positive displacement
Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are two different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
Single-stage
The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only one cylinder, which means one stroke is required to move air from one cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the one with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have one air intake, and two-stage air compressors have two air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
low noise
Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The two water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers two models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and two universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
editor by CX 2023-05-31